Loan-to-Value Ratio (LTV) Explained: The Financing Limit on a Home Loan

Loan-to-Value Ratio (LTV) Explained: The Financing Limit on a Home Loan

In short

  • Loan-to-value (LTV) is the loan amount divided by the value of the property used as collateral: LTV = loan amount / property value.
  • In Türkiye, the limits in the banking regulator’s (BDDK) decision No. 11364 of 29 January 2026 vary by home value band and by energy class on the Energy Identity Certificate.
  • The gap is the down payment: if the LTV limit is 80 percent, at least 20 percent of the value must come from your own funds.
  • Appraised value and sale price can differ, so it is worth asking the lender which value it uses.
  • This article is educational. It recommends no bank, product or property, and all numeric examples are hypothetical.

When you go to a lender to buy a home, an obvious question is whether you can borrow the whole price. Most of the time the answer is no. Behind that answer sits a concept called loan-to-value, or LTV.

LTV shows how a lender and the regulator draw the risk limit on a home loan. For you it determines how much you can borrow and how much you must bring yourself. That makes it one of the first numbers to look at when planning a home purchase.

In this article we look at how LTV is calculated, how appraised value differs from the sale price, what the Turkish banking regulator (BDDK) says in its decision of 29 January 2026, how a down payment changes things, and a worked example. Readers elsewhere will find the concept familiar even though the limits differ by country. No bank or product is recommended.

What LTV is and how to calculate it

Loan-to-value is the amount lent divided by the value of the asset pledged as security. For a home loan, the collateral is the property being bought (or mortgaged).

The formula is simple:

LTV = loan amount / property value

For a home worth 5,000,000 TL with a 4,000,000 TL loan, LTV is 80 percent. The remaining 1,000,000 TL, or 20 percent, comes from you and is the down payment. So the down payment share can be thought of as 1 − LTV.

The higher the LTV, the higher the lender’s risk. If the property loses value or the borrower cannot pay, selling the home may not cover the debt. A low LTV leaves a safety margin; a high LTV is more fragile to income problems and to swings in property values. That is why regulators in many countries may set maximum LTV limits.

We explained the basics of home financing in what a mortgage is and how home loans work, and which part of each payment reduces the debt in mortgage principal explained. LTV sets the starting point of that mechanism, the largest principal you can take out.

Appraised value and sale price

The “property value” in the LTV denominator is not always the price written in the sales contract. Three ideas should be kept apart:

  • Sale price: what buyer and seller agree on.
  • Appraised value: the market value estimated in a report by an authorized valuation firm.
  • Declared deed value: the amount declared in the land registry, which can differ from the other two.

BDDK’s decision says the ratio is calculated against “the value of the home taken as collateral,” but the text does not describe how that value is determined. In practice lenders generally rely on an appraisal report prepared by a licensed valuer. Which value is used (appraisal, sale price or the lower of the two) is something to ask your lender when you apply. This is not a legal or banking-practice explanation; it only shows why the difference matters.

The difference can change outcomes. Suppose, hypothetically, the sale price is 5,000,000 TL, the appraised value is 4,600,000 TL and the home’s energy class is B. Because the value is within the first band (5 million TL or less), the table below gives a 90 percent limit for this class.

  • If the lender uses the appraised value, the maximum loan is 4,600,000 × 0.90 = 4,140,000 TL. Against a 5,000,000 TL price, you must fund 5,000,000 − 4,140,000 = 860,000 TL yourself (17.2 percent of the price).
  • If the lender uses the sale price, the maximum is 5,000,000 × 0.90 = 4,500,000 TL, and your own funds are 500,000 TL (10 percent).

The 360,000 TL gap could be a big surprise to a buyer who planned for a 10 percent down payment. It is safer not to fix your down payment exactly before the appraisal result is known, and to leave a cushion.

BDDK limits: the decision of 29 January 2026

In Türkiye, maximum LTV ratios for housing loans are set by decisions of the BDDK Board. The regulator’s list of board decisions not published in the Official Gazette includes a series of housing-loan LTV entries starting in 2020; as of this article’s date, the most recent housing LTV decision on that list is Decision No. 11364 of 29 January 2026.

Under Article 12 of the Regulation on Credit Transactions of Banks, the decision applies to consumer loans used to acquire a home and to home-collateralized loans, excluding vehicle loans. The limits vary by the home’s value band and by its energy class on the Energy Identity Certificate. The table in the decision is:

Home value Classes A-B Class C Other classes
Up to 5 million TL 90% 80% 70%
Over 5 million up to 7 million TL 80% 70% 60%
Over 7 million up to 10 million TL 70% 60% 50%
Over 10 million up to 20 million TL 50% 40% 30%
Over 20 million TL 40% 30% 20%
Maximum loan-to-value ratios in BDDK Board Decision No. 11364 of 29 January 2026, by home value. Energy class is determined from the Energy Identity Certificate.

Key takeaways from the table:

  • As home value rises, the permitted ratio falls, so expensive homes need a larger down payment share.
  • For two homes of equal value, the one with better energy efficiency has the higher LTV limit. For homes up to 5 million TL, for example, the limit is 90 percent for classes A-B and 70 percent for other classes.
  • The table in the decision varies only by value band and energy class.
  • The decision also says that matters under Board Decision No. 10656 of 24 August 2023 continue to apply using the rates in this new decision, so some details are understood by reading the two together. According to BDDK Decision No. 10849 of 15 February 2024, Decision No. 10656 sets the maximum ratio of the loan to the value of the collateral, and the decisions also refer to how a borrower’s home-ownership status is assessed. The table in this article contains only the ratios in Decision No. 11364; the matters in No. 10656 and other board decisions are not explained here.
  • Vehicle loans are outside the housing-collateral category.

Limits can change over time. A decision is not valid forever, so confirm the current position on BDDK’s website or with your lender before applying.

How the down payment changes things

The LTV limit and the down payment are directly linked. With home value V and limit s:

  • Maximum loan = V × s
  • Minimum down payment = V × (1 − s)

Putting in a larger down payment, which means a lower LTV, has several effects:

  • Lower installments. With the same interest rate and term, the installment changes in proportion to the loan amount. Borrowing 3,600,000 TL instead of 4,800,000 TL cuts the installment by about 25 percent (3,600,000 / 4,800,000 = 0.75).
  • Lower total interest. Less principal means less interest under the same terms.
  • A bigger safety margin. Even if property prices swing, your debt is a smaller share of the value.
  • A thinner cash buffer. Putting more into the down payment can drain your emergency fund and other goals. Do not overlook liquidity while raising the down payment.

So there is no one-sided rule of “as much down payment as possible” or “as much loan as possible”; the balance depends on your budget and risk tolerance.

Worked example: same home, different energy class

Consider a home with an appraised value of 6,000,000 TL, hypothetically. Because the value lies between 5 and 7 million TL, the row applies: 80 percent for A-B, 70 percent for C and 60 percent for other classes. Here is the maximum loan and minimum down payment for the same home by energy class:

Energy class LTV limit Maximum loan (TL) Minimum down payment (TL) Down payment share
A-B 80% 4,800,000 1,200,000 20%
C 70% 4,200,000 1,800,000 30%
Other 60% 3,600,000 2,400,000 40%
Hypothetical figures; the ratios of Decision No. 11364 are applied to an appraised value of 6,000,000 TL.

For the same home, A-B allows a 4.8 million TL loan while “other” allows only 3.6 million, a difference of 1.2 million. The minimum down payment goes from 1.2 million to 2.4 million. The energy certificate is therefore not just paperwork; it can affect financing power.

Now look at the band boundaries. The decision does not say whether the ratio applies to the whole home value or only to the slice within each band. Because the table gives a single percentage per band and the formula reads “value x ratio”, the most common reading is that it applies to the whole value; confirm this with your lender. If the table applies to the whole value, a class A-B home valued at exactly 5,000,000 TL has a maximum loan of 5,000,000 × 0.90 = 4,500,000 TL. A class A-B home valued at 5,200,000 TL falls into the 80 percent row, so its maximum is 5,200,000 × 0.80 = 4,160,000 TL. On that reading, the more expensive home gets a smaller maximum loan. This matters when planning near a threshold: if you are evaluating a home near a band edge, confirm with your lender which band the appraised value falls into.

Common mistakes

Treating the LTV limit as a guaranteed loan. The limit is a ceiling. The lender may offer less based on your income, credit record and other criteria.

Confusing sale price with appraised value. Planning your down payment only from the sale price can leave you short if the appraisal comes in low.

Forgetting costs. Title-deed fees, appraisal fees, insurance and file charges may need cash on top. Learn them from current rules and your lender.

Stretching the down payment at the expense of your cash buffer. Using up the emergency fund can push you into borrowing when an unexpected expense arrives.

Assuming limits are fixed. Board decisions change; reading earlier years’ rules as current ones is misleading.

Looking only at LTV. Term, interest rate and installment burden matter as much. We discuss term choices in mortgage term explained.

How this works in Türkiye

In Türkiye, LTV limits for housing loans are set by BDDK Board decisions, and banks apply their own credit policies within those limits. The regulator’s decisions page lists housing-LTV entries (including those dated 19.03.2020, 01.07.2021, 23.06.2022, 24.02.2023, 24.08.2023, 15.02.2024 and 29.01.2026), which shows that the limits are updated from time to time. Decision No. 10849 of 15 February 2024 on that list is an implementation decision for the 24 August 2023 decisions, so not every entry brings a new ratio table.

The notable feature of this decision is that it builds energy efficiency into the limits: for two homes of equal value, energy class can change financing power. So when house-hunting, finding out the Energy Identity Certificate and its class is useful for both energy bills and borrowing capacity.

Questions to ask when applying: Which value (appraisal or sale price) is used? What is this home’s energy class and what is my LTV limit? What costs do I need to cover beyond the down payment? What do the interest, term and installment scenarios look like? The answers make your home budget more realistic.

Conclusion

LTV answers the question of how much of a home loan is debt and how much is yours. The formula is simple, but how the value is determined, BDDK’s limits that vary by home value and energy class, and the gap between appraisal and sale price can change the result significantly.

When buying, think about the home’s energy class and likely appraised value, read the limit from the table, plan the down payment without draining your cash buffer, and confirm the decision at its source. The home and figures in this article are hypothetical and imply no recommendation of any bank, product or property.

Related articles

Sources

Want to keep these calculations as visual notes? We share swipeable summaries of our articles on Instagram (in Turkish): @paraveotesicom

Leave a Comment

Your email address will not be published. Required fields are marked *

Enter the code below:

Scroll to Top